What are the needs and quality of High-Speed Local UV Varnishing Machine

High-Speed Local UV Varnishing Machine is an important equipment for the surface decoration and production of packaging products such as carton, carton, etc. It is played by improving the surface performance of the print, improving wear resistance, dirt resistance and water resistance of the printing products. A very important role.

High-Speed Local UV Varnishing Machine

In terms of optical machine skills and quality, markets and optical machine manufacturers have strict control and needs for High-Speed Local UV Varnishing Machine. Let ’s take a look at it together

1. High-Speed Local UV Varnishing Machine skills

High-Speed Local UV Varnishing Machine should work smoothly, the transmission system operation is normal, no constant noise; the operation agency is reliable, the execution mechanism is harmonious and correct, no card resistance and spontaneous movement; The layer should be flat, and there should be no wrinkles, damage, spots, drums, foaming and significant strips, and the upper light layer has no sticky appearance; Value; Active the noise of the optical machine operation must not be greater than 85DB (A), and the noise of the semi -active optical machine operation must not be greater than 80DB (A); the safety protection equipment should be completely reliable and there are exhausting exhaust equipment.

2. High-Speed Local UV Varnishing Machine's quality demand

Short -connected power circuit and maintenance circuits (including machine -seat) wires must not be less than 1MΩ; external maintenance wire terminals and electrical equipment any exposure of conductor parts and body shells of the body It is necessary to taste the 1Min resistance experiment. The experimental voltage is 1500V, and there should be no breakdown or flash.

3. High-Speed Local UV Varnishing Machine experimental method

The machine's empty operation experiments, the need for each product of the light host is necessary to conduct empty operation experiments ≥120min. During this time, high -speed operations should be ≥15 minutes.

4. High-Speed Local UV Varnishing Machine temperature test

After the empty operation experiment, measure the bearing operating temperature with a little temperature meter, should be ≤35 ° C;

The primary axis of the upper light machine, the parallel degree between the roller, and the radial round beating test of the operating appearance;

After the machinery operation experiments, measure the main axis such as measuring, coating, printing (lining) in the light machine, parallel and primary axis, roller operation radi radial beating in the optical machines in the light machine, respectively The value of its detection should meet the corresponding rules in the table above.

5. High-Speed Local UV Varnishing Machine noise test

When High-Speed Local UV Varnishing Machine is carried out at the highest speed, the machine noise is measured at the highest speed. The speaker is 1.5m higher than the ground. The noise of active light machine operation must not be greater than 85DB (A); semi -active light machine operating noise must not be greater than 80dB (A).