How to solve the problem with Automatic Folder Gluer sticking to the carton?

The method of solving Automatic Folder Gluer sticks to the carton collapse is as follows as follows

1. To control the use of the original paper, check the gel situation of corrugated paper, and the water absorption index on the surface of the original paper. If the surface of the original paper is poorly applied, the water absorption will be high, and it is easy to have a low temperature and humid environmental impact on the cold storage, which will cause the carton to recover, soften, and reduce the compressive strength.

Automatic Folder Gluer

2. When producing cardboard, control the water content of the cardboard. The water content of the cardboard should not be too much, because the hardness of the cardboard is low, which affects the pressure index of the cardboard. During the cardboard processing process, the amount of glue on the process of single -sided and double -sided machines cannot be too large. Once the amount of glue is large, the ascent shape of the cardboard will deform, and the shape of the tile directly affects the side pressure of the cardboard, the edge pressure is reduced, and the pressure resistance of the carton will also decrease.

3. The adhesion strength of Automatic Folder Gluer cardboard is large, and the adhesive strength is the adhesive force of corrugated paper and paper and noodle paper. If the cardboard is fake, after the carton is compressed, the noodle or inside paper will be separated from the corrugated paper, then the pressure resistance of the carton will decrease directly.

4. The gap pressure control in the production link should be moderate. In particular, pay attention to the gap pressure on the automatic folder gluer. Corrugated compression collapse, affecting the pressure resistance of cardboard cardboard boxes

5. Use water -splashed agent, waterproof light oil, etc. to solve the problem of waterproof and moisture -proof problems on the surface of the carton.