Some problem handling schemes commonly commonly issued by Automatic Flute Laminator

In addition to the quality and disadvantages of Automatic Flute Laminator, in addition to the quality, the operation technology is also very important. There will be some failures and problems in the production regulations. How to operate when processed after printed processing to avoid waste of mounting membranes? How to deal with a folding image?

1. Automatic Flute Laminator after processing must wait until the seal is dry before it can be produced through the paper mounting machine, otherwise it will cause product bubbles or hair pulling phenomena;

2. Automatic Flute Laminator should pay attention to the direction of the paper when mounting. Special attention should be paid to thick paper, reducing the paper will cause curls due to crushing stretching;

3. Automatic Flute Laminator The products processed after the printing should be straight. For phenomenon paper with "tight" and "ruffled edge", it should be treated, and the paper mounting machine is mounted. The paper of the phenomenon of "tight edges" can be hanged, and the paper of the "lotus leaf edge" phenomenon is baked;

4. The processing temperature of Automatic Flute Laminator is controlled at 40-60 ° C. Too high temperature or too low will affect the paper and film. High temperature will deform the paper and the film, and the low temperature will cause insufficient viscosity.