Auto Cardboard Laminator Precautions

Auto Cardboard Laminator Precautions

The quality of the noodle paper will cause Auto Cardboard Laminator to mount

In daily production, due to the inaccurate handover of each group during the printing paper, tearing phenomenon in the mouth of the noodle paper. When using Auto Cardboard Laminator to mount, it is easy to collide with the paper or folding state during the paper delivery process. After the mounting stickers, the phenomenon of inconvenient paper and corrugated cardboard will be caused. When this happens, we need to adjust the transfer time of 牙 teeth to prevent the torn paper on the side of the torn paper.

In addition, if the moisture content of the noodle paper is not suitable or stacked neatly, it is easy to make the rolling paper on the side of the mouth. At this time, the front regulations on the paper chain are not in a straight line contact push state. In this case, the cardboard that is mounted will also make the paper significantly protruding the corrugated cardboard. When cutting, it will cause due to mold cutting. The protruding noodle paper is easy to bend and cause the previous regulations to be inaccurate, and the semi -finished products cut out will cause errors. This requires us to control the moisture content of the noodle paper and prevent the high water from declining the high degree of water.

There are also semi -finished noodle paper after printing, upper light, light, or coating. In this way, it can avoid inaccurate phenomena when mounting with corrugated paper. Here we also remind everyone that you should pay attention to the usual inventory code. There must be a quantitative standard and strict implementation of its temperature, humidity, and flatness. It may cause negligence to cause a group of products to lose.

The above is the precautions of Auto Cardboard Laminator