2023-11-28 17:32:50
Fully Automatic Die Cutting Machine will always have more or less common small faults in the actual use. For example, how to solve this problem during the production process?
1. The waste falling from the incision gathers the explosive line in the groove. The operator should clearly remove clean foreign bodies in time.
2. Fully Automatic Die Cutting Machine is too large when the pressure is too large. At this time, the pressure should be reduced and the waste edges are just separated.
3. The indentation mold or the bottom is too thick, the indentation is narrow, and it is easy to explode. The appropriate thickness should be selected, and the width of the indentation should be moderate
4. The surface of the printed matter has a large area of dark color such as blue or black. During printing, no additional or less ink additives are not added in dark ink to enhance the adhesion of the ink on the paper to reduce the bursting and explosive phenomenon.
5. When the thickness of the film is too large, it is easy to produce explosive lines.
6. Try to buy mature equipment as much as possible when choosing Fully Automatic Die Cutting Machine, so as to effectively protect your products from damage.
The explosive line problem will cause the paper to crack at the indentation, and ultimately cause the mold cutting effect of Fully Automatic Die Cutting Machine, so try to avoid this situation.