The working principle of Automatic Folder Gluer

Automatic Folder Gluer host is mainly composed of left, right wall plates, three transmission rubber rollers (4), a carton roller (5). The paste box host is the main set of the machine. It is driven by the motor and the reducer (2) through the sprocket and the chain to rotate the rubber roller (4) of the three transmission. Transmit actions when you complete the paste. The sprocket at the other end of the rubber roller is connected by the chain and the polarized core shaft (3), and the rubber roller rotor drives the polarized core shaft (3). The required action, the pressure wheel (7) on the pressure wheel axis is a bonding effect, and the height is adjusted by the hand wheel (6). The adhesive roller in the adhesive box head is rotated by the motor (2) through the deceleration, transmitted by the sprocket (8), and the adhesive roller is turned to the motion of the paste box. Putting down to make the adhesive roller not dry with the adhesive, which hinders flexibly rotating during work.

When you stick to different sizes, you can adjust the positioning room

The above is the working principle of Automatic Folder Gluer