Use Automatic Bagging Logistics Sorting Line What should I pay attention to?

What do you need to pay attention to when using Automatic Bagging Logistics Sorting Line? Below, Hengyun Mechanical Packing briefly introduces it.

1. Check whether the compressed air pressure meets the requirements (more than 0.6bar) before booting, and check whether each major component is intact, such as heating knife, disc knife, and other components. At the same time, check whether there are other personnel around the machine to ensure the safety after booting.

2. Clean the supplier system and metering machine before production to ensure the hygiene of the product.

3. Close the main power air switch, connect the power supply to boot, set and check the temperature of each temperature control instrument, and put the envelope.

4. First adjust the bag and check the coding effect. At the same time, the supply system supply is turned on. When the material meets the requirements, first open the bag making mechanism bag. At the same time After meeting the requirements, start material filling and production.

5. During the production process, check the quality of the product at any time, such as the basic requirements of the products such as vegetable shreds, real vacuum, thermal lines, wrinkles, weight, etc., and adjust at any time if there is a problem.

6. The operator shall not adjust some operating parameters of the machine at will, such as the number of running, servo and frequency conversion, if you need to adjust, you must report to In the case, the operator can appropriately adjust the temperature and partial angle parameters of each temperature controller, but the team leader and the working commander must be notified first to ensure that the various parameters of the device operation in the entire production process must be controlled to ensure the stable operation of the equipment. Ensure normal production and product quality.

7. If there is a problem with the equipment or the quality of the product is unqualified, it should be stopped immediately to deal with the problem. It is strictly forbidden to deal with problems during the operation of the machine to prevent safety accidents. If you can't deal with or relatively large issues, immediately notify the team leader to handle them together, and at the same time, "is being maintained, and it is strictly forbidden to start" safety warning sign. The operator must deal with the problem with the maintenance personnel to resume production at a faster time.

The above is the Automatic bagging logistics sorting line that Hengyun Machinery Packaging is briefly introduced.