High-performance automatic inspection gluing and folding machine How to maintain the gluing and folding section properly?

2023-11-28 20:31:01

High-performance automatic inspection gluing and folding machine How to maintain the gluing and folding section properly?

High-performance automatic inspection gluing and folding machine

In the packaging printing industry, High-performance automatic inspection gluing and folding machine is one of the important post-press processing equipment. At present, with the rapid development of China's packaging and printing industry, High-performance automatic inspection gluing and folding machine is more and more widely used, such as food, medicine, health care products, cosmetics, alcohol, light industrial products, etc., the box, basically using High-performance automatic inspection gluing and folding machine. High-performance automatic inspection gluing and folding machine is basically used for box gluing.

  Today, Heng Yun Machinery Technology (Dongguan) Co., Ltd. takes you to understand how to properly maintain the High-performance automatic inspection gluing and folding machine gluing and folding department:

  A, carton gluing mouth and glue wheel width to match. In the automatic gluing process, the width of the carton gluing mouth should meet the requirements of the gluing machine, too wide or too narrow will affect the quality of the glued box. Too narrow will occur overflow of glue; too wide will make the pre-folding is affected to some extent, in addition, the concentricity of the gluing wheel to ensure accurate packaging anti-counterfeiting, edge of the knurling to be free of wear and tear to ensure that the gluing is uniform.

  B. Before gluing, make sure the conveyor route of carton sticky mouth edge is parallel to the conveyor belt.

  C. The gap between the upper and lower gluing wheels and the amount of gluing should be suitable for food packaging to ensure that the gluing layer is thin and uniform.

  D. The folding part is equipped with folding transmission, if necessary, through the adjustment of the folding transmission, to ensure accurate alignment of the sticky mouth.

  E, has been coated with adhesive sticky mouth must not touch the other parts of the machine, otherwise the glue will be in this part of the accumulation of more and more, and ultimately rubbed to the parts that should not be coated with glue.

  F, the location of the glue should be appropriate, too far from the crease line, the box is not beautiful, too close to the position of the glue may not be coated with glue binding, resulting in difficulties in the box.

  The above is the High-performance automatic inspection gluing and folding machine gluing department and folding department how to correctly maintain the simple introduction.

  We ensure the safety of each machinery and equipment with high quality technical service and solve each problem with more mature program. We sincerely welcome your inquiry.