What is the size of the FlatBed Automated Screen Printing Loading System?

What is the size of the FlatBed Automated Screen Printing Loading System?

The operator of FlatBed Automated Creen Printing Loading System often troubles to regulate FlatBed Automated Screen Printing Loading System size. In fact The adjustment is similar to other silk printers. The following is introduced by Limo super manufacturers. How to adjust the size of FlatBed Automated Screen Printing Loading System.

FlatBed Automated SCRINTING LOADING SYSTEM size adjustment:

1. Adjustment of the parallelism of the three -layer between the guide rail, printing version, and working platform

If these three layers are not parallel, the network printer is almost impossible to work. Generally, a guide or platform is used as the benchmark.

2. Adjust the platform and guide rail

The platform and the guide rail should be parallel. The ink scraping version is moved along the rail. If the two are not parallel, the scraper will not always contact the platform with a certain pressure, and even the gap. This adjustment has been adjusted before the machine is out of the factory. Fully automatic silk net printing machine

3. The adjustment of the screen version and the platform

The screen printing version should be parallel to the platform, otherwise the network distance is inconsistent, causing the scraper printing pressure and the deformation of the screen printing. Therefore, the flatness of the net frame itself should be guaranteed. Require.

4. Adjustment of mesh distance

The network version and the product must have a distance of 2-5 mm. This is called the network distance.

5. FlatBed Automated Screen Printing Loading System scraper

The knife mouth of the scraper with silk printed must be sharp. After a long time, there is no right angle, and it becomes a rounded corner. The printed things are very vague and the lines are thick. FlatBed Automated Creen Printing Loading System