When using Fully Automatic Varnishing Machine, you can follow the steps below:

When using Fully Automatic Varnishing Machine, you can follow the steps below:

1. Preparation: Make sure Fully Automatic Varnishing Machine and the required materials are ready, including Fully Automatic Varnishing Machine, optical curing agent, light liquid, clean cloth, etc.

2. Clean surface: Before glory, make sure that the surface of the object to be lined is clean and dusty. Use clean cloth or specific cleaners for cleaning to ensure that there are no oil, dust and other impurities on the surface.

3. Adjust the device: According to the size and requirements of the object, adjust the parameters of the light machine, such as the upper light speed, the strength of the light source, and the thickness of the coating. Operate according to the instructions of the device.

4. Optimal liquid: Apply the appropriate amount of light liquid on the surface of the object to be applied. When coating, you can use tools such as brush, spray gun or roller to ensure that the coating is uniform and appropriate.

5. Light curing: Place the upper light on the workbench of the upper light machine, start the light source, so that the light is illuminated to the surface of the object, so that the upper light solution quickly solidifies. According to the requirements of the optical curing agent, set appropriate light time and strong light.

6. Check and trim: Wait for the light solution to be completely solidified, check whether the surface of the object is uniform and smooth. If necessary, it can be trimmed and polished to achieve better results.

7. Cleaning and maintenance: After use, clean the coating tools and workbenches of the optical machine in time to prevent the liquid residual and blockage. Maintenance of equipment regularly to ensure the normal operation of the equipment.

Precautions:

-In the operation of Fully Automatic Varnishing Machine, pay attention to safety and avoid direct contact with the light source to avoid damage to the eyes and skin.

-Accakes according to the material of the object and the characteristics of the upper liquid fluid, choose the appropriate optical fluid and equipment to obtain the best light effect.

-Fot the instructions of the use of equipment and upper liquid suppliers and safety operation procedures to ensure correct operation.

The above is the general Fully Automatic Varnishing Machine Guide Guide. The specific operation also needs to be adjusted according to the requirements of the device and the requirements of the optical fluid. It is recommended to read the instructions of the equipment and the optical fluid in detail before the operation, or consult professionals to obtain more accurate guidance.