What are the steps of Fully Automatic Folder Gluer?

What are the steps of Fully Automatic Folder Gluer?

Fully Automatic Folder Gluer Step Step: 1. Carefully check the work order, sample, determine the lid box glue, prepare it; The color box, the baffle on both sides is less than 1mm from the color box, and then adjust the limited bolt to determine the phenomenon of every-the phenomenon of the smooth passing of the product without bond; Make the products waiting for the boxes smoothly without the occurrence of bondage, and adjust the auxiliary rail and flow wheels according to the post -press. Make its size suitable for the specifications of the color box; 4. Adjust the belt belt and the box guide rail, and then adjust the box host and rotation pressure, and the cross coordination with the belt;

5. Adjust the glue cylinder and check whether the glue of the glue cylinder is sufficient. It is advisable to lose 80%of the glue wheel. After the machine is adjusted, press the "operation" or inch -inch "key to press" to debug the machine to the paper key and check whether the performance of the machine is abnormal. - -10 sheets, adjust the speed of the test machine after confirming the location and formation specifications; 8. When the box is paste, pay attention to the state of the paper in the paper, not over -line, offline or misplaced, so as not to affect the appearance and molding effect of the color box; Confirmation: Strictly follow the signed sample methods; 10. After the production is completed, clean up the hygiene of the machine and keep it clean. The above is Fully Automatic Folder Gluer manufacturer Hengyun Machinery, which is shared by the box machine that is shared for you, I hope it will be helpful to you.