The Automatic Flute Laminator is not available directly on high speed

The Automatic Flute Laminator is not available directly on high speed

Over the past few years, Automatic Flute Laminator technology has been maturing at an accelerated pace. At present, Automatic Flute Laminators are claimed to be high speed laminators, as all Automatic Flute Laminators on the market now indicate a speed of 10,000 or even 12,000 sheets. In fact, there are still many difficulties when asking the Automatic Flute Laminator to start at a speed of 10,000 or even 12,000 sheets, mainly for the following reasons: 1. The thickness and density of the face paper and the size of the paper Generally speaking, the thicker the face paper the better it is, the higher the density of the face paper the better it is, and the face paper can generally be made at a speed of more than 10,000 sheets per hour if it is 350g. If the paper does not reach 350 grams or more, then the speed of lamination will not be able to keep up with 10,000 sheets, such as 250 grams of paper, then the speed can only open to about five or six thousand. At the same time, the paper area is also a problem, the larger the paper, the slower the Automatic Flute Laminator start speed, the smaller the paper the faster the start speed, which is directly proportional.

In the past few years, Automatic Flute Laminator technology has been maturing at an accelerated pace. At present, domestic automatic laminators are all claiming to be high-speed laminators, as the Automatic Flute Laminator now on the market all indicate a start-up speed of 10,000 sheets or even 12,000 sheets. In fact, there are still many difficulties when asking the Automatic Flute Laminator to open at a speed of 10,000 or even 12,000 sheets, mainly for the following reasons:

1, the thickness and density of the face paper and paper size

Generally speaking, the thicker the face paper, the better to do, the higher the density of the face paper, the better to do, the face paper is generally as long as 350 grams can make more than 10,000 sheets per hour speed, if the face paper does not reach 350 grams or more, then the laminating speed can not keep up with 10,000 sheets, such as 250 grams of paper, the speed can only open to about five or six thousand. At the same time, the paper area is also a problem, the larger the paper, the slower the Automatic Flute Laminator start speed, the smaller the paper the faster the start speed, which is proportional.

2, glue concentration problem

Glue is an extremely important element of our Automatic Flute Laminator bonding, in our most people's concept, the higher the concentration of glue, the stronger the bonding, in fact, this is a misconception, in fact, glue is about the initial adhesion and bonding power, good glue bonding power and concentration is not necessarily related to the general user thinks that as long as the concentration is high, the concept of cardboard bonding is strong This is also wrong, the water content of the cardboard has a great relationship with the amount of glue, the amount of glue is less cardboard water content is less, the cardboard hardness is high.

Therefore, we advise Automatic Flute Laminator users to increase the proportion of cooked glue when making glue, then the glue will settle less and the glue will flow better, then when Automatic Flute Laminator is running at high speed, Automatic Flute Laminator will not appear to throw off glue. "Many users still do not know why the Automatic Flute Laminator cannot be driven at high speeds, as the glue will be thrown out, so many manufacturers will only drive the Automatic Flute Laminator at 7,000 to 8,000 rpm after buying it. This is the reason why a good glue is less concentrated, thinner and has a stronger bond.

So here we advise Automatic Flute Laminator users not to turn on the high speed directly when using the Automatic Flute Laminator, otherwise it will not only affect the subsequent work of the laminator, but also affect the efficiency and increase the time and labour costs.