2023-11-28 18:43:00
Introduction to the maintenance and processing method of Automatic Folder Gluer
1Automatic Folder Gluer's correct use and maintenance requirements. Automatic Folder Gluer can play a normal and due role after purchasing, which mainly depends on the correct use and maintenance. Automatic Folder Gluer seems to be simple and easy to operate, but it cannot ignore the correct use and maintenance. Use and maintain the Automatic Folder Gluer. First of all, pay attention to employees with strong sense of responsibility to serve as the captain. This is a prerequisite for the machine to play normally. Secondly, the operator must read the product manual carefully before the machine is used. If necessary, the operator can conduct pre -job technical training to allow the operator to be familiar with the performance and use requirements of the machine. Familiar with the maintenance methods and maintenance methods of the operation, and strictly follow the equipment specifications and do a good job of machine maintenance. Third, the factory should also pay attention to the effective supervision and management and inspection of the use of the equipment, take necessary restriction measures to prevent the blind use and maintenance of the negative attitude of the machine, and ensure that the machine is used normally and maintenance.
2Automatic Folder Gluer's use of problems with problems.
There is a semi -automatic Automatic Folder Gluer. During the trial period, there have been abnormal phenomena of paper -in -in -law, especially when the cardboard is curled, it is easier to frequently occur in the air failure, although some components and cardboard stacking angles on the machine are performed on the machine. Repeated adjustment is still unaware of the fact that production efficiency has been greatly affected, and the situation is annoying. The paper delivery structure of the machine uses the belt to rotate friction to drive the cardboard to enter the "bridge" belt. The working principle of the paper transmission is: a row of paper belt on the paper table is composed of 6 width of about 30mm rubber belt, and the cardboard is directly piled on this row to send the paper belt. When the belt is rotated, under the action of friction, the bottom cardboard that is in contact with the belt is transported forward. Whether this kind of paper -in -in -law structure can be continuously delivered depends on the contact area of the belt and the cardboard and the size of friction with the cardboard. Since the cardboard is composed of a multi -layer structure material, a whole piece is composed of a piece of whole, and the flatness is far less than that of paper, which directly affects its contact area with the belt, which is one aspect. It is easy to cause slipping when it falls off and adsorb on the rubber belt. Third, after a period of use, the surface becomes smoother; in addition, the light layer in the noodle paper in contact with the belt is relatively smooth. The contact surface and friction coefficient between the belt and the cardboard are the main causes of the air delivery air failure. After the cause analysis, use a piece of broken cloth to dip the warm water and wipe the six paper rubber belts again, so that even if the paper scraps that are adhered to the surface of the belt are cleaned up, the smoothness of the rubber belt decreases significantly, thereby the friction coefficient With a large improvement, the rotation of the belt increases the frictional resistance of the cardboard during the rotation process, which avoids the emptiness caused by slippery. After this method is treated, the cardboard delivery is smooth, and the air failure has been better eliminated. Due to the correct treatment of the problem with the machine, the continuity and production efficiency of the cardboard transportation are guaranteed.