Automatic Flute Laminator four major precautions daily work

Automatic Flute Laminator four major precautions daily work

In the long -term operation, it is inevitable that AutoMatic Flute Laminator is inevitable. Therefore, it is inevitable to maintain the printing of Automatic Flute Laminator for ensuring the quality of the Automatic Flute Laminator. Flute Laminator operator must complete. The specific maintenance of Automatic Flute Laminator can be divided into:

1. Control of production operation

When the liquor printing paper is thin and curled, the speed of the machine cannot be opened too fast. When installing paper and corrugated cardboard, the relative positions of their left and right are aligned, so as to avoid biased errors due to the positioning of the paper, and the horizontal mounting stickers are not accurate. If the itinerary of the upper and lower chains of the machine is not adjusted, there is a deviation in the front and rear positions; the paper -blocking device of the pile of paper does not rely on the side of the paper, so that the paper stacked to the left and right. Pinghe does not accept the cardboard neatly, etc., and it will also cause errors in the position of the tape and corrugated cardboard mounting stickers.

Therefore, the production speed of the machine should be reasonably grasped according to the characteristics of the paper; when installing paper, the relative positions of the noodle paper and the corrugated cardboard must be accurate; the itinerary of the up/down chain must be accurate; The paper -block limit device of the paper is fixed;

2. Machine paper delivery and positioning agency

If the machine is adjusted or maintained properly, it is easy to cause errors and disadvantages of facial paper and corrugated cardboard. The main reasons are:

(1) There is a loose phenomenon of the paper chain mechanism, which makes the upper/down chain work inconsistent or unstable;

(2) The front regulations on the upper/down chain are loosened, causing the phenomenon of impact on the side of the paper;

(3) The contacation position of the paper steel strip of the paper strip or the gap is too large, and it does not play a role in slowing the inertial impulse during the high -speed exercise of the cardboard;

(4) The up/down roller roller does not often accumulate a certain amount of rubber fluid, which blocks the synchronous rolling conveyor of paper or corrugated cardboard.

The existence of these adverse situations is easy to cause the phenomenon of facial paper or corrugated cardboard. Therefore, the chain of the machine should be cleaned up, cleaned in time, and maintains good lubrication; the presence of loosening should take corresponding measures to deal with it in time; adjust the position of the paper steel plate to keep it with the cardboard to maintain a certain amount of friction with the cardboard. Force, prevent too much and advanced paper; should be cleaned up with the glue or stain on the upper and lower rollers.

3, the outlet of the upper/lower roller gap, the cardboard mounting error caused by the poorly losing paper

When the gap discomfort of the upper and lower roller rolling roller, after the corrugated cardboard after mounting passes through the upper and lower rolling rolling rollers, on the one hand, it is easy to make the noodles and corrugated paper shift or make the paper foam. On the other hand, on the other hand, on the other hand, It is easy to cause corrugated cardboard to be compressed and deformed. If the phenomenon of empty or skew the noodle paper transports normally, it is easy to cause foaming and dehydration (the length of the cardboard on the conveyor belt is different in length, caused by uneven pressure on the paper) and the mounting stickers are not allowed to mass failure.

In this regard, the gap between the up/down roller roller should be adjusted to the thickness of the cardboard to be adapted to make the cardboard moderate pressure to prevent the occurrence of the quality of the quality of foaming, guming or corrugated deformation.

4. Do the correct use and maintenance of the machine

The high mechanical accuracy of automatic paper mounting machines is a reliable guarantee for production efficiency and quality. Therefore, we must pay attention to the correct use and maintenance of the machine. This is an important link to prevent the machine's abnormal wear and damage.

After the new machine procurement, if the factory's own technical conditions are restricted and the production operators cannot be trained by themselves, the equipment supply manufacturer should send technicians to train the equipment operator to ensure that the machine can be used correctly and normal after procurement.

In the running -in period used by the device, the production speed of the machine should not be opened too fast, and it is generally controlled at about 3,000 photos/hour. In the process of equipment trial production, pay attention to check whether the machine keeps the machine is maintained through the method of "watching, smelling, touching".

Looking at, pay attention to see if the working status and actions of the machine -related components are abnormal;

It smells, just pay attention to listening to the sound of abnormal sounds;

Touching is that for a period of time when the machine just runs, it is necessary to stop the machine in a timely manner to touch some rotor, gears and other rotor of the machine. Whether it is obviously heating up and produce an unusually hot feeling.

If abnormal phenomena are found, check the inspection immediately and find the problem in time.

During the use of machines, we must operate strictly in accordance with the requirements of the equipment manual, and do a good job of lubrication and regular maintenance of the machine. This is an effective guarantee to ensure that the equipment maintains good accuracy and improve production efficiency and quality.

Automatic Flute Laminator, as an important supporting equipment for pre -printing carton production, is one of the production elements that cannot be ignored in the production and processing of carton. Therefore, only the market dynamics of Automatic Flute Laminator in depth, according to the actual situation of the factory and the characteristics of the product, Reasonable purchase of machines suitable for production, and correctly use and maintain in order to enable the purchased equipment to play a good role in improving production efficiency and product quality.